Ok, this post is going to be long, but the main point of this post is that I need major help. This is a desperation call to all the users on this board. I started that previous thread about building a new desktop and you helped me pick out a system. I picked out the system that you said. It all arrived today, and I started to put it together. I got the CPU installed, the RAM install and then screwed the motherboard into the case. I screwed the power supply in too. That is as far as I've got. Here is the link to my thread and the system Big B put together for me. I was told that if i knew how to use a screwdriver and follow directions i would be ok. I can use the screwdriver alright, but, frankly, all the directions that came with the parts absolutely suck a fat one. The powersupply has like 3 different groups of cords and the instructions in the book just tell you to plug the cords into the motherboard. They don't tell you which cords to use and where they go, because apparently with this power supply you can configure it for different power outages depending on how it plugs in. Not completely sure, but they do an extremely poor job of explaining. Big B, or anyone else who saw my previous thread about my build, please try to help me through this. Can you please look at my parts list in that thread and if you have knowledge of that certain configuration, possibly point me in the direction of a more in depth guide or instructions. I have about 20 wires just hanging out of my computer right now because all of the instructions do a terrible job of explaining what each one does and where to plug it in.