Connecting Front Panel Audio Connectors, Very Confused! Please Help!

Discussion in 'Sound Cards and Speakers' started by zaid786, Dec 12, 2006.

  1. zaid786

    zaid786 Geek Trainee

    Likes Received:
    0
    Trophy Points:
    0
    OS: Windows Vista Ultimate RTM (Build 6000)
    Processor: AMD Athlon 64 3500+ Venice Core
    RAM: 2048MB Corsair Value Select (2x512MB, 1x1024MB)
    Graphics Card: Nvidia Geforce 6100 (Onboard)
    Motherboard: GIGABYTE GA-K8N51GMF-9

    Problem Description: Hello! I've been trying to connect my front panel audio by using various guides floating on the internet but can't seem to get it right, and no sound works from the front panel audio, i've also tried using my motherboard manual but I'm complete confused to connect what where! I'm using a X-Blade Case (link here: Eclipse Computers - Product Details) which has the following connectors:

    Mic IN
    GND
    MIC BIAS
    L IN
    L OUT
    R IN
    R OUT

    My motherboard manual has these configurations:

    HD Audio:

    Pin Definition

    1 MIC2_L
    2 GND
    3 MIC2_R
    4 -ACZ_DET
    5 Line2_R
    6 FSENSE1
    7 FAUOIO_JD
    8 No Pin
    9 LINE2_L
    10 FSENSE2

    AC'97 Audio:

    Pin Definition

    1 MIC
    2 GND
    3 MIC Power
    4 NC
    5 Line Out (R)
    6 NC
    7 NC
    8 No Pin
    9 Line Out (L)
    10 NC

    For a start, which layout am I supposed to be using for the above case wires? They are all split individually, and also which way do they go in? Which way does the writing on them have to point? Or doesn't it make a difference? lol I'm not too sure. If someone can help me with this thanks in advance!! And my motherboard manual link is:

    http://europe.giga-byte.com/FileList/Manual/motherboard_manual_k8n51gmf9_e.pdf
     
  2. Karanislove

    Karanislove It's D Grav80 Of Luv

    Likes Received:
    0
    Trophy Points:
    36
    Which Speaker set do you have to connect???
     
  3. zaid786

    zaid786 Geek Trainee

    Likes Received:
    0
    Trophy Points:
    0
    the front audio ports which are the headphone and the microphone
     
  4. Karanislove

    Karanislove It's D Grav80 Of Luv

    Likes Received:
    0
    Trophy Points:
    36
    you mean this is your front panel??
    If yes, then try this,,,,,connect Microfone with Mic in nd Headphones with L IN.....
     
  5. zaid786

    zaid786 Geek Trainee

    Likes Received:
    0
    Trophy Points:
    0
    those are the wires coming from the case, they are not the front panel..
     
  6. Karanislove

    Karanislove It's D Grav80 Of Luv

    Likes Received:
    0
    Trophy Points:
    36
    Then what is in the front panel???:confused:, i mean which ports??
     
  7. zaid786

    zaid786 Geek Trainee

    Likes Received:
    0
    Trophy Points:
    0
    its ok mate, dnt wori about it! i've fixed the problem this configuration did it:

    Case wire FP Audio connector
    Mic IN goes to 1 MIC
    GND goes to 2 GND
    L OUT goes to 9 Line Out (L)
    R OUT goes to 5 Line Out (R)
     
  8. Karanislove

    Karanislove It's D Grav80 Of Luv

    Likes Received:
    0
    Trophy Points:
    36
    Glad u've got the things sorted.... :good:
     

Share This Page