Intel CPU upgrade?? need info

R

RacerX

Geek Trainee
OK i opened my case and my mother board says
P2XBL REV.B1
I have a slot 1 350mhz intel, and 3 ram banks, w/ 64mb taking up one bank.

Using Tweak-xp it tells me under system info PII/PII Xeon Genuine Intel.

I need to know how much ram the pc can handle and the fastest processor I can install in the board. I have no books or boxs or anything on the board.

I have a friend who installed a PIII 1.0Ghz slot 1 processor in his PII 450Mhz Dell board.

I'm really looking to install a 400-500 Mhz processor and install at least 256mb of ram

Any help I would appreciate it

Thanks
AJ

[email protected]
 
That's a tricky question to answer, because some boards can and others can't. If it can, it may simply need a BIOS update, otherwise you're SOL. I'm not sure who made your computer, but if it's something like Dell, Gateway, etc., they can tell you exactly how high you can go. You should be able to put at least a 450MHz Pentium II in. After that, it's really dependent on the motherboard.
Just because your friends PC can accept a 1GHz chip doesn't mean yours will.
 
DFI P2XBL Slot 1 Motherboard

Processor
Intel Celeron® Processor 266MHz-333MHz (66Mhz).
Intel Pentium® II Processor 233MHz-366MHz (66Mhz).
Intel Pentium® II Processor 350MHz-450MHz (100Mhz)
Slot 1 Socket for Future Expansion.

Chipset
Intel 82440 BX AGPset

Cache memory
CPU Built-in 128KB/512KB L2 cache for Celeron/Pentium II Processor

System Memory
3 x 168-pin 3.3v DIMM sockets support
Supports 8/16/32/64/128 MB DIMM Module
Supports SDRAM PC66 & 100(Supports ECC, 72 bit)
Supports 8MB to 384MB DRAM Size
Supports 66/75/83/100/103/112/133 MHz System Clock Speed Setting
Supports 1.5-8.0 Multiplier Setting

PCI IDE
2 X PCI Bus Master UDMA/33 IDE ports (up to 4 ATAPI Devices)
Supports for PIO Mode 3, 4, UDMA/33 IDE & ATAPI CD-ROM

I/O Interface
1x floppy port (360KB-2.88MB)
2x serial ports (16550 high-speed)
1x parallel port (SPP/EPP/ECP)
PS/2 Keyboard
PS/2 Mouse
2x USB

Expansion slot
4 x PCI 32-bit slots, PCI 2.1 compliant
3 x ISA 16-bit slots
1x AGP (1x & 2x Mode,66/133MHz) slot
Supports Creative PCI Sound Card SB-Link™.

Power Management
Power On by LAN, RTC Alarm, Modem ring on, Keyboard & Mouse & Soft-Power Switch
Power Off by Windows® 95 Shut down & Soft-Power Switch
Supports 3 Level ACPI LED

Form Factor
ATX Form Factor, 4 layer PCB
Fits in Regular ATX Case (30.48 x 19cm)
ATX Connector on Board
Double Deck ATX Back Panel

BIOS
2 Mbit (256KB) FLASH RAM
Award PCI BIOS with Green, PnP, DMI, INT13 (HD>8.4)and Anti-Virus Functions
LS120, ZIP, ATAPI CD-ROM, IDE #1, #2, #3, #4 Bootable
 
Thanks Everyone

Hey all u guys really helped,
big b need more ppl like u in the world, see u try and help out everyone in all the forums.
Sniper -that web page was correct thats my board, im doing the bios update and Im going to put a pIII 500 mhz chip in since it said it would support it. Thanks for taking the time to research it
syngod - also thanks for taking ur time too, to look around post that info

thanks
All
AJ
 
You must log in or register to reply here.
Back
Top