psu question

[xslynux]

hi... i was just wondering if im getting enough juice from my generic 350w psu from codegen. and also what is the optimal voltage? right now im getting
vcore 1.47v idle and 1.42v underload
3.3v is 3.24
5v is 4.91
12v is 12.22
dram is 2.54v

my specs:
p4 2.4 fsb 533mhz
soyo p4vtp pt800 chipset
640mb ddr
radeon 9600xt 256mb 560/350 temp 33c idle 39c underload
1 intake and 2 neon light outake fans

 

[Big B]

You're going to have stuff fluctuate, so most looks good, though the vCore looks a little low, as the default value is 1.5V. However, the main thing is that the system is stable.

 

[xslynux]

You're going to have stuff fluctuate, so most looks good, though the vCore looks a little low, as the default value is 1.5V. However, the main thing is that the system is stable.

thx ;)

 

[Anti-Trend]

I'm not familiar with your motherboard's BIOS, but if you can change voltages manually, you might want to give the core about .05v-.10v more. That way when your system is under a heavy load, your CPU won't be strained. That is, if your CPU isn't already running super hot. Adding voltage will heat it up a few degrees.