DavidNW
Big Geek
My board just does not seem to be able to take more than 1 stick of DDR RAM at a time.
I of course, have 2 DIMM sockets (184 pin), but if I put, say, a 256MB stick in slot 1, and a 512MB stick in slot 2 - the PC just crashes with a BSOD (relating to memory failure - I think).
Both the afore-mentioned sticks of RAM have been throughly tested for errors (Memtest 86) and have come up clean.
My board's manufacturers claim that it can take up to 2 x 1GB sticks (1GB in each slot), so there should be no problem there. Any ideas? I'm starting to think that it might be BIOS related - but I've just updated that.
Thanks in advance,
David.
I of course, have 2 DIMM sockets (184 pin), but if I put, say, a 256MB stick in slot 1, and a 512MB stick in slot 2 - the PC just crashes with a BSOD (relating to memory failure - I think).
Both the afore-mentioned sticks of RAM have been throughly tested for errors (Memtest 86) and have come up clean.
My board's manufacturers claim that it can take up to 2 x 1GB sticks (1GB in each slot), so there should be no problem there. Any ideas? I'm starting to think that it might be BIOS related - but I've just updated that.
Thanks in advance,
David.