well, i'll start by addressing the problem: -the floppy drive acts like if it doesn't have any disk inside -the green light it has is ALWAYS on, from when the comp is ON until it's OFF a little intro to my stuff: motherboard: Gigabyte Pentium 4 Titan 533 Series GA-8SR533 http://www.giga-byte.com/MotherBoard/Products/Products_Spec_GA-8SR533.htm and the floppy is: Sony, Model MPF920-Z the floppy didn't work when it came with the pc, one day i made it work, but then the problem started again what can i do?? EDIT: it doesn't work in any OS, by that i mean that it doesn't work in DOS, neither in the booting sequence
Make sure the floppy cable is installed correctly. It just sounds like you have it flipped around at one end, probably the one connected to the drive itself.
Who uses floppy drives anyways? I mean why don;t you just get a burner or something? That would fix your problem, heh. ~Temporal~
a floppy is great to flash bioses because you can easily create bootdisks with it, whereas you need a bootable floppy to creat a bootable cd. I also vote for the cable in the wrong way. The red stripe has to be on the first pin of the drive AND the board, which not necessarily right besides the mini-molex connector, unlike hdds. Also, there's a side of the cable where it is crossed over, that part goes into the drive, not the board.
OT: but with programs that can flash the BIOS from Windows these days, the only reason other than that to have one is for an unsupported IDE/SATA or SCSI controller during Win2k/XP or Linux install. There are methods to get around this, but you'd need to make your own custom Windows CD or linux distro to do that or have an unattended/network install that grabs resources from another place.