First of all, I have the P5W DH Deluxe board and a Thermaltake Soprano case. The case has an ear/mic cable which runs from the top of the case down to the motherboard, etc. I know where I need to plug the connectors in on the motherboard in order to make it work, however, I cannot figure out the proper configuration of the 6-pins for the connector. The Asus "conversion" guide supplied by Thermaltake does not 100% match the layout the motherboard user guide gives me. This is what the motherboard gives me in terms of pinconnections: For HD Audio: SENSE2_RETUR SENSE1_RETUR PRESENCE# GND PORT2 L SENSE_SEND PORT2 R PORT1 R PORT1 L For Legacy AC 97: NC NC NC AGND Line out_L NC Line out_R MIC2_R MIC2_L The pins coming from the jacks in the case are the following: EAR R Return R EAR L Return L MIC IN MIC VCC Ground And according the the conersion guide the following should work: EAR R should go with LINE_OUT R EAR L should go with LINE_OUT L Ground with Ground What about the other 4 pins? The guide does not give a direct translation of those. Can anyone help me? I would greatly appreciate it!
What I understands with this is EAR R - line out R Return R - Line in R EAR L - Line out L Return L - Line in L MIC IN - both Mic_Right and Mic_Left MIC VCC - There should be something like VCC port in your sound coz this provide power to the Mic. (VCC - common-collector voltage) Ground - Ground