How to format SATA hard disk?

I have a sata hard disk with a MSI km4m-v motherboard.

The problem is i cannot format it the usual way with the bootable Win XP CD. It says it cannot detect any hard disk or something like that.

I had sent it twice to the shop last time and they told me that I need the floppy disk to format it. I didn't ask how. Now i am miles away from the shop, my warranty from the shop is useless. I tried asking some of my friends but they never dealt with SATA hard disk before so they cannot provide me with any answer.

Can you tell me how step by step to format a SATA hard disk using the bootable CD and the special floppy disk? Do i need to configure the PC before formatting it?

Please help me. Thanks a lot.

 

Boot with the cd, and pay attention to what's written on the monitor.
When Windows starts to load drivers, it will ask you to press F6 if you want to load any other drivers, you do so press F6.

Then it will ask you for your floppy, so you put it in and load the drivers.
After that, the hard drive should be detected.

Make sure the drive is detected by the BIOS because if not, Windows won't be able to detect it either even with the floppy.

 

Yeah make sure the bios is set to search for SATA as well as PATA like mine, my computer crashed a while back and it didnt recognise that i had a HDD, when i checked the bios i found out that it had chenged and was set to only search for PATA and only found my CD and DVDRW drives.

 

how do I confirm my bios is checking for both a pata & sata hard drive. My PC has nothe (came with pata). I accidentally purchased a sata drive, and bought an adapter to convert it to pata. However, I am still having difficulty formatting the hard drive. It will go through all of the motions (spending hours formatting a 750 GB drive), then have an error at the end, stating it cannot format.

 

those adapters can be dodgy, sometimes they work fine & other times you have problems, my advise is to throw it at someone you don't like & get a PCI SATA card & because XP doesn't support SATA HDDs you will need a driver disk that will come with the SATA card or a much better solution would be to slipstream the SATA drivers into your XP CD, then you wouldn't need to retain the driver disc

BTW: here is a "how to" for slipstreaming

 

Thanks for the advice. I've been looking on line, for the card you recommended. Do you know of some specific examples of cards? i don't want to buy the wrong thing again! Am I looking for a SATA RAID card? Please be patient with me, as this is al greek to me.

 

Is this it?

NCIX.com - Buy nGear SATA & IDE PCI-E1 Controller Card 2SATA 2IDE - NG-SATAIDE-PCI-E1 In Canada.

 

yes, but, does your system have PCIe slot, MSI doesn't say it has PCIe & it also include an IDE port which you don't need, this is a PCI card not a PCIe (PCI express)

yes & no usually SATA card come with limited RAID controllers but not always

don't worry, we arn't born knowing loadsa crap about computers, we have to learn

Edit: anything else ?

 

I have pics of my board, and the "adapter". How do I attach? It asks for a URL.

 

never mind....easier w/o the "quick reply". I think they're now attached.

Here are the pics: What kind of board is this? Also shown is the "adapter".

 

On NCIX.com - Canada's Premier Computer Store - Great Technology, Service and Selection., what part board would I need to purchase?

 

well, you can either upload attachments to HWF by scrolling down & clicking "manage attachments"

& browse & upload your pics, or i use an online image host like www.imageshack.us and upload a pic and copy the BBCode into the reply box

 

this 1 NCIX.com - Buy Vantec UGT-ST300 eSATA Serial ATA Controller Card PCI 1INT 1EXT - UGT-ST300 In Canada.

&
"CONVERTS SERVIAL ATA TO PARALLER ATA"

servial & paraller arn't even words, just use some common sense, it was trying to say serial

 

How does the hard drive hook up to this?

http://www.ncix.com/products/index.php?sku=21062&vpn=UGT-ST300&manufacture=VANTEC

 

the SATA cable that should come with the drive connect here or you may need to purchase a SATA cable, where the very crude arrow is pointing

Edit: this card has 1 internal SATA port & 1 external port

 

Naturally, the drive didn't come with the cable. Nice! Something else to buy. Hope like heck it works. On the back of the drive, there is another spot to connect a cable. Is this unused?

 

does it look like this ?


if the similar to the image you just connect a molex connector to it (from your PSU)
otherwise, you may want a new PSU or one of these molex to SATA HDD power converters
or this

BTW: next time, come here (HWF) before you buy something

 

thanks for your help!

 

np, just don't buy anything in the future, come to HWF first

 

Got the parts and installed last night. Works now. THANKS FOR THE HELP!