hi I currently baught 4 old used motherboards which are still in pretty decent shape I have had all of them run just fine but the one I just put together isnt working A jumper fell off of it and I cant figure out where to put it.The mother -board is a "IWILL KK266-R ver:1.2" with 512mb pc133 and amd duron 900~mhz socket A processor. down below is a description of the boards and there processors they came with. 1.IWILL KK266-R ver:1.2, 900~mhz "http://www.ocworkbench.com/hardware/iwill/kk266r/kk266rp1.htm" 2.EPOX EP-7KXA 850~mhz oc 975mhz "http://www.motherboard.cz/mb/epox/EP-7KXA.htm" 3.ASUS K7M rev:1.04 750~mhz "http://www.motherboard.cz/mb/asus/K7M.htm" 4.MSI K7-Pro ver:1 650~mhz "http://www.pcstats.com/articleview.cfm?articleID=232" IF you can find manuals for the following boards (mainly the KK266-R) I would be more then satisfied. Thanks for your feedback.
there should be instructions as to the jumper settings written on the M/B (usually in white) oh! just a quick point, if you can't get one working: try a BIOS reset (worth doing anyway with used M/B's)
I got it to work finaly i looked at the jumper settings on the review page and set them accordingly thanks for your info though
