Memtest86 is a program that tests your PC's memory modules for reliability and functionability re: errors. Memtest86 should - as I understand it, check that your installed memory is okay or otherwise. It cannot tell the exact memory module that is 'bad' (if any), but it will tell you if there is a problem with your memory overall. Run the test with your existing memory module/s overnight - say, at least 7-8 hours. If no errors are flagged up, then your memory is likely okay. If there is a problem - remove one of the memory sticks - test again, and if that turns up okay, then the memory stick you have left in is likely problematic. It's simply a matter of isolating a memory stick that is defective by a process of elimination. I have had several BS’OD recently relating to memory failure and have tested my memory extensively using the aforementioned procedures and nothing has been flagged up as problematic in any way shape or form. My system is now running fine – after several reboots that were prompted by BS'OD relating to memory failure. I'm not familiar with Windows error codes, but can't help but feel that such error messages can be wholly inaccurate and misleading (from my experience anyway). Hence, I can easily understand why many people are converting to Linux as a more stable OS. Windows - after many years of usage, really does seem to be overly problematic, although of course, it remains the de facto OS due to its ease of use that has opened computing up to the general public through its sheer versatility and easy operation. However, I’m seriously considering making the move to a Linux-based system in order to achieve a perceived greater operating stability.
Good awnswer but how do i do this test where do i locate memtest86 and what conditions should i perform the test ie offline,anti v turned off?
Download [link=http://www.memtest86.com/]memtest86 3.2 release[/link] on a floppy. Restart your computer and set your first boot device to floppy. Save and exit.....let your computer start with that floppy...~!
