after Bios update strange things happening with your computer

[Orygano]

I have a motherboard MSI Eclipse SLI, I did update the BIOS version 1.A. and now I have a problem, programs to check the hard drive does not show me SMART and disk temperature. Before you update the BIOS everything worked, and now I do not show. Please help.


I do not know what happened but everything worked well this morning, turned on the computer and then launched it again and Windows Vista does not want to run only a black screen, so I decided to install Windows 7

Widnows 7 system installed, but did not finish my installation, and is now a black screen and nothing happens, the light from the disk is not blinking. What is wrong ...? Please help

 

[RHochstenbach]

Welcome to HWF :)

When turning on your computer, enter the BIOS setup screen (usually F2 or DELETE). Load Setup Defaults and then Save it. This makes sure that the defaults for the latest BIOS update are active. Then try installing Windows again.

If this fails again, it's a good idea to contact the support department of MSI. A BIOS update can't be reversed unfortunately.

 

[Orygano]

I installed Windows 7 and now is like the first time that I turn the computer restarts itself, and so the circle is re-launching as the first reboot and then enter the system ....! What could be causing ...?

On Saturday as I did when compiling the BIOS Update, I wanted to check the temperature my hdd and no programs that are not shown. UPDATE I had before the BIOS set to AHCI and RAID mode normally showed. I was told on another forum that I have to change the IDE have changed, but still showed a temteratura and SMART disk. One guy wrote that it should also work on AHCI, but I have to install the latest Chipset reins.
On Sunday morning a computer and then just walked these problems began to boot, so he acted once again involve a system of only a black screen and nothing. Retorted-installing windows 7, then when he had to finish the installer again, black screen and went on, restarted and fired again, installer windows 7 went the whole system is installed, I installed I do not know how well the reins FSB oi then do that as I wrote below that the first launch it was a restart for the second time the system loads.

Well now, to check your computer and turned on the restart again. BIOS post a long long time and then showed a black screen, then for a moment appeared in the upper left corner of the white pointer and a restarted after the system is loaded

Replied to me at my email with the MSI

Thanks for contacting msi technical support team! Regarding your issue, please update the MB bios toi v1.B3 for a try.
BIOS v1.B3

You can flash MB bios by M-Flash function.

In addition, would you please tell us which porgram do you use to check hard drive temperature?

Best Regards,
msi technical support team