Igp

Discussion in 'CPU, Motherboards and Memory' started by hwf_newbie, Oct 3, 2010.

  1. hwf_newbie

    hwf_newbie Geek Trainee

    Likes Received:
    0
    Trophy Points:
    0
    Hi!
    I know what an IGP is but I don't know where it is situated. It's another function of the northbridge isn't it? Or is it a separate thing situated away from the chipset?

    I have one more doubt.

    If I choose a motherboard with a higher FSB than my cpu, will it affect the overall performance of the system?
    Thanks
     
  2. RHochstenbach

    RHochstenbach Administrator

    Likes Received:
    26
    Trophy Points:
    48
    Welcome to HWF :)

    I think you mean AGP, which is a slot to install a graphics card (predecessor of PCI Express). IGP is a network routing protocol.

    If your FSB frequency has been configured to a higher rate than the CPU, it gets overclocked to a higher clock speed. This could damage the CPU or cause overheating. You should look into your BIOS settings if you can manually lower your FSB frequency. Some motherboards can lower it automatically, but that depends on the motherboard. It won't cause your CPU to run slower than initially intended, but you should make sure that the specific CPU model is supported by the motherboard.
     
  3. hwf_newbie

    hwf_newbie Geek Trainee

    Likes Received:
    0
    Trophy Points:
    0
    Nay you got it completely wrong. I'm not new to this field. I was talking about Integrated Graphics Processor (IGP).
    I'm not talking about OC here. I'm talking about the maximum FSB of my mobo

    Thanks
     
  4. RHochstenbach

    RHochstenbach Administrator

    Likes Received:
    26
    Trophy Points:
    48
    Pardon me, my bad. The Integrated GPU is located near the VGA connector of the mobo.

    You can use a CPU with a lower FSB frequency on a mobo with a higher FSB. This works, but the CPU will run at a higher clock rate. This makes it run faster, but could cause overheating. Lowering the FSB frequency in the BIOS to be equal the the one specified for your CPU should correct this problem.
     
  5. hwf_newbie

    hwf_newbie Geek Trainee

    Likes Received:
    0
    Trophy Points:
    0
    Thanks! alright... so I should jump into BIOS and lower the FSB value right?
     
  6. RHochstenbach

    RHochstenbach Administrator

    Likes Received:
    26
    Trophy Points:
    48
    That's true. Preferably before you install the new CPU.
     
  7. hwf_newbie

    hwf_newbie Geek Trainee

    Likes Received:
    0
    Trophy Points:
    0
    Is it possible to get into the bios without installing a cpu? I've never tried it...
     
  8. RHochstenbach

    RHochstenbach Administrator

    Likes Received:
    26
    Trophy Points:
    48
    No, that isn't going to work unfortunately. I thought you already had a different CPU installed.
     
  9. RHochstenbach

    RHochstenbach Administrator

    Likes Received:
    26
    Trophy Points:
    48
    No, that isn't going to work unfortunately. I thought you already had a different CPU installed.
     

Share This Page