Search Results

Search Again
Page 10 of 10
  1. BoBBYI986
    Post

    Rebuilding RAID1 with new hard drive

    It's a fake raid (driver based) there might be an option to re-build the raid from the raid's firmware. but alot of the time u rebuild fake raid's...
    Post by: BoBBYI986, Oct 27, 2009 in forum: Storage Devices
  2. BoBBYI986
    Post

    overclocking fsb limit reached?

    what cpu are you using? the maximum system bus yourboard handles is 1000mhz, also when increasing your system bus you will also have to increase...
    Post by: BoBBYI986, Oct 21, 2009 in forum: Overclocking & Cooling
  3. BoBBYI986
    Post

    Computer issues(overheating)

    Try disconnecting the power switch from the motherboards control panel and use a flat head screw driver to short the power switch pins on the...
    Post by: BoBBYI986, Oct 19, 2009 in forum: General Hardware
  4. BoBBYI986
    Post

    Help!!! Computer freeze with screeching sound!

    Try benchmarking your harddrive using HD Tune for any dodgy read speeds. Also run memtest86 for memory issues, you could also run prime95 for...
    Post by: BoBBYI986, Oct 19, 2009 in forum: CPU, Motherboards and Memory
  5. BoBBYI986
    Post

    no POST on new mobo and card

    Make sure everythin is seated correctly and nothing is lose. Then try resetting the cmos again if it posts and you keep having the same issues...
    Post by: BoBBYI986, Oct 19, 2009 in forum: Video Cards, Displays and TV Tuners
  6. BoBBYI986
    Post

    Whats the best ssd hard drive out right now for the money?

    you want to go for SLC (Single layer Cell) not MLC (Multi Layer Cell) Architecture
    Post by: BoBBYI986, Oct 16, 2009 in forum: General Hardware
  7. BoBBYI986
    Post

    Odd harddrive issue - Loads OS one time, but not the next

    Hi, try resetting the cmos could be an issue with the sata or Ide controller depending on what controller your using. also try replacing the data...
    Post by: BoBBYI986, Oct 15, 2009 in forum: Storage Devices
  8. BoBBYI986
    Post

    Ram Voltage Conflicts?

    Hi, you should be fine with the upgrade, if it's lower speed memory the board will clock both memory modules to that memory bus frequency. the...
    Post by: BoBBYI986, Oct 15, 2009 in forum: CPU, Motherboards and Memory
  9. BoBBYI986
    Post

    Did i fry my CPU?

    if you fried your cpu it wouldn't post. As Rhochstenbach said will most likely be graphics card drivers, try uninstalling the card from device...
    Post by: BoBBYI986, Oct 13, 2009 in forum: CPU, Motherboards and Memory
  10. BoBBYI986
    Post

    PC Randomly Freezing

    try running HD Tune and benchmarks your harddrives look out for low read speeds. Also try running Prime95 for stability issues, could well be the...
    Post by: BoBBYI986, Oct 13, 2009 in forum: General Hardware
  11. BoBBYI986
    Post

    Questions about my CD and DVD Drives

    try swoppin the data cables out.
    Post by: BoBBYI986, Oct 10, 2009 in forum: Storage Devices
  12. BoBBYI986
    Post

    Bipac Billion 7402nx

    Hi it's sorted now I sync at 20mb. 3mb more than the o2 box. just left the router a few days sorted it self with the DLSAM. Also installed the BT...
    Post by: BoBBYI986, Oct 10, 2009 in forum: Networking and Computer Security
  13. BoBBYI986
    Post

    beeps on (non) startup

    Hi, your machine isn't posting, try resetting the cmos to start off with, if it still doesn't post it's a problem with the following: motherboard,...
    Post by: BoBBYI986, Oct 9, 2009 in forum: CPU, Motherboards and Memory
  14. BoBBYI986
    Post

    System starts then shuts down within seconds

    hi, remove the power switch from the motherboards control panel and then short the two power switch pins with a flathead screw driver. Also...
    Post by: BoBBYI986, Oct 9, 2009 in forum: CPU, Motherboards and Memory
  15. BoBBYI986
    Thread

    Bipac Billion 7402nx

    Hi all I just replaced my modem/router supplied by o2 broadband with a new Bipac Billion 7402nx, but the problem is it seems to sync my line like...
    Thread by: BoBBYI986, Oct 9, 2009, 1 replies, in forum: Networking and Computer Security
Find older messages
Showing results 181 to 195 of 195
Search Again
Page 10 of 10