amd athlon 3000+ 994mhz?

I'm just wondering -- Did you enable Cool n' Quiet in your BIOS? If you did, that's why your getting a X5 Multipier. Turn on Core Cell or AI-Nos for Asus boards :) Or turn of Cool n' Quiet.
 
pelvis_3 said:
Assuming the CPU is a venice core the Multiplier should be @ 9 (9x200Mhz=1.8Ghz) and the voltage should be @ 1.35/1.4v!
Try changing these settings in BIOS!
Click to expand...

and chaginng these will help my comp? cos i aint conferdent with these things, couls this be the reason my comp is starting in fail safe mode? and also thanks for the help
 
bobbyk said:
I'm just wondering -- Did you enable Cool n' Quiet in your BIOS? If you did, that's why your getting a X5 Multipier. Turn on Core Cell or AI-Nos for Asus boards :) Or turn of Cool n' Quiet.
Click to expand...
yea my manual told me to go to minimal power thingy, shall i have it as family one instead?
 
What's yor MOBO? It should be inside one of the advanced options or the Cell Menu. Lokk in you manual and chack if you do have Cool n' Quiet Technology. If you do, I'm pretty sure that's what's causing your concern. And if it is, don't worry. You'll have all the power you need when you need it. What's your board?
 
bobbyk said:
What's yor MOBO? It should be inside one of the advanced options or the Cell Menu. Lokk in you manual and chack if you do have Cool n' Quiet Technology. If you do, I'm pretty sure that's what's causing your concern. And if it is, don't worry. You'll have all the power you need when you need it. What's your board?
Click to expand...

abit fatality an8 i cant find cool and quiet on ne of my settings and my computer is toaly runied it take aboit 30 reboots to get it running then it starts in fail safe.......its driving me mad
 
Okay, just relax. Power up your PC and go into BIOS. Now, find the function that says "Load Setup Defaults" and enable it. Re-boot and see what happens. Check back.
 
bobbyk said:
Okay, just relax. Power up your PC and go into BIOS. Now, find the function that says "Load Setup Defaults" and enable it. Re-boot and see what happens. Check back.
Click to expand...
ITS WORKING OMG I WANNA HAVE UR BABIES WHAT HAPPENED WAS A TECHNICIAN HAD A LOOK IN MY BIOS AND CHANGED SOME THINGS AND MOST OF FORGOT TO CHANGE THEM BACK!! EVRYTHING IS OK (TOUCH WOOD) AND CPU IS RUNNING NORMAL SPEED I LOVE YOU SO MUCH THANK YOU SO MUCH UR GOING TO HEAVEN EASLY JUST THANKS AND THANKS AGAIN IVE BEEN SO WORRIED U CANT IMAGINE THANK YOU!!!!!!!!!!!!!!!!!!!!!!!!

HDFK
 
bobbyk said:
No problem. That's what this forum is for. Hey, hit the thanks button. At least that makes 3. :)
Click to expand...
ill hit every thanks button that u post cos u r the man...........u fixed my computer !!!!! woo ledgend.......im guessing if that technician hadnt fiddled around it would of been ok all i gotta do now is install drivers to make sure it finds my harddisk is sata cos it finding it as ide but that shouldnt be hard......................should it?
 
bobbyk said:
Naah. Just be sure to load the drivers that came with the mobo and you'll be okay. Good luck. :)
Click to expand...
wnt have to install xp again? if i get stuck im sure ill get help from these lovely people
 
load up and see if it works, you shouldn't need to install XP again as its the CPU that was the problem, not the HDD, glad someone could help, nice one bobbyk, i should of thought of that, its helped me out a few times when my bios got screwed, just load defaults then adjust what i need to adjust.
Well hope all goes well.
 
You must log in or register to reply here.
Back
Top