CPU/Chassis funs -> "FULL ON" or "AUTOMATIC MODE"?

[ccc]

Hi

Can someone pls help me to set optimal UEFI settings from AsRock Z77 Pro4 with i5 3450?

I have these Hardware (self-build gaming PC):

AsRock Z77 Pro4, Z77, LGA1155, PCI-E 3.0, CF, ATX
Intel Core i5 3450 BOX, LGA 1155, 4C/4T
Scythe "Big Shuriken 2 Rev.B" CPU Cooler
Corsair XMS3 2x 8GB, DDR3-1600, CL11-11-11-30
Asus HD 7850 DirectCU II 2GB, PCI-E x16 3.0, DP, HDMI

All funs: CPU und both chassis fans where set by default "FULL ON" and I'm really unsure, if this is optimal.
For example, what should I set by "Target CPU Temp" and chassis funs or what about other important settings like "Power Saving Mode" (disabled by default)?

 

[Doug Burger]

If this is a dedicated gaming machine and will be shut off when not in use then just leave all the settings where they are. You could bump the Target CPU temp by 5 or 10 degrees but with that CPU cooler I doubt it is required.

 

[Jan Benedict]

CPU fans adjust depending on the cpu temp. Also the fans connected to the motherboard also adjust depending on temperature. The ones connected using the molex connectors are at 100% or so. You'll have no problem with the setup, since you still can't overclock your cpu, no need to fret.