Nice Card...Bit Loud Though...

Matt555

Matt555

iMod
I got my XFX 6600GT (128MB AGP8x) today and it performs much better than my old card in Knight Online (pretty much the only game I play at the minute). However one thing annoys me...the noise, when I looked at the box I could see a lovely chrome (probably just coloured that way) cooler showing through a clear plastic cover..."Wonderful!" I thought, but once installed its very loud, my PC was virtually silent before, and now it sounds like Heathrow again :(
The card came with software but none of it can be used to control the fan speed, any ideas?
Matt
 
I'd remove the HSF on it if it was too loud and install a new one. I've seen a tutorial somewhere on installing quite a large one but can't find it.
 
yeah i may look into a new HSF, i did originally order an Arctic Cooling one but realised it was for PCI-e 6600 series cards and not AGP...well i'll search around for another one, i dont think i can control this fan speed either, its only a 2-pin fan otherwise i would have connected it to my gatewatch.
Any suggesstions on a decent (QUIET) cooler for an XFX 6600GT 128MB (AGP8x)
 
I'd say either the Vantec Iceberq 5 Premium VGA kit or the Silent copper Zalman either are a good choice but I'm leaning toward the Vantec as they tend to be quieter even when Zalman states 'silent' I've seen products they call silent that get as lound as 37d so that's not good. Check reviews though.
 
yeah will do, i'll search around before making my choice, and i always have you guys an gals...(off to play farcry on this thing now)
 
after reading reviews i think i will get the vantec one, the Zalman looks nice but it sticks over the side of the card and will interfer with the case i think, plus the vantec one has a nice blue light :P
I have searched around and round lots of stuff and people having the same questions as me, I have a different smaller silver cooler on the 6600GT rather than the one with the picture of the dog on it.
http://www.pcpop.com/pcpopimg/05/2/2-16-10-26-165649557.jpg
Thats the cooler I have on it and the next link is a picture of what i thought the cooler would be.
http://www.yesky.com/imagesnew/hardware/1125/xfx/2.jpg
But it looks like i'm going to get the vantec cooler, I realise why i cant have an Arctic Cooler (and why they dont make them) the PCI-e to AGP bridge is the part with a Heatsink on it and the arctic cooling coolers cant fit over this so they dont make one for the 6600GT agp...damn, well the vantec one looks nice and i have read good reviews about it, and its not too expensive on ocuk, although i will search around for a cheaper one.
 
Well i think i'm going to order the Vantec Iceberq 5, i hear the Zalman ones are big and can still be noisy even though they are meant to be silent.
 
Just ordered the Vantec Iceberq 5 Kit, from trusty www.overclockers.co.uk
Ordered it on next day delivery (should be here Friday, it's the next day after the order is recieved before like mid-day or something) as the noise is annoying...
Hopefully this shall make temps drop (with a little help from Mr AS5) and keep things quiet again...:good:
 
got the cooler today, would have it fitted but one of the metal standoffs they gave me doesn't have a thread on it so i can't screw it into the cooler, I pushed it in but it just falls out and wouldn't hold the cooler in place...I have contacted overclockers and they said take it up with Vantec as it's a machining error and it's their fault (because it was like that sealed) so I am currently awaiting a reply from Vantec...
They should replace it for free though right? As in no way is it my fault...I was going to stick it on using some Arrodite (i think that's what it's called, my dad uses it, its industrial strength glue) but thought I'd better not as if there's any problems in the future then they can blame them on me...
 
Things just don't like going well for you do they Matt?
Do you have any Motherboard spacers that'll fit?
 
lol you're right pelvis_3...i've tried that, the motherboard spacers just aren't long enough...:ohah:
There's nothing I could have done (overclockers either, they told me to take it up with the company directly as its a manufacturing fault...)
 
yeah, it shouldn't be a problem though, I have all the plastic packaging etc, although its cut up from where i had to cut it open (it was that anoying sealed stuff that you have to use scissors on)
If they need the whole thing back then they can have it, i just want to get it sorted ASAP
 
Yay got a reply from Vantec, they said send us copies of the e-mails from the company you ordered it from (to prove i bought it) and then give them my mailing address and they'll send me out replacement parts.
 
Got my replacement parts today, computer is damn near silent again w00t!
Finally I can leave this heap on overnight to carry on folding while I'm not using it...
The cooler is nice, I've taken pictures and as soon as I get time to crop them down I will post them on here or write a review.
Temps are good too, with some AS5 and this new cooler my Card is at about 48*C idle (not sure about when a game is on, haven't use it like that yet...)
It used to be around the 59-60*C mark (idle) before I got this cooler, so it's quiet, and it's all copper construction makes it a great cooling product as well...
:good:
 
Yeah although now my CRT monitor I've got is buzzing, my TFT is fine...bah, oh well I may put my GateWatch back in to reduce the noise just that little-bit....:P
 
I like the look more than anything, it does take a while for the fans to slow down as it's not instant control but it's cool, I took it out because the thermal probes broke and didnt report temperatures at all (i broke the probes by pulling them out of their protective thermal tape coverings...oops) and I think the contacts were touching my case when they were connected and making a good connection and conducting well, making the GateWatch think my temps were 90*C and setting the alarm off, that was annoying when it did it at 2am...bah...
 
You must log in or register to reply here.
Back
Top