Win OS cant work stable on my computer

S

Serhiy

Geek Trainee
Hello,
I bought computer 4 years. AMD ATHLON 2.4 GHZ. VIDEO INTEGRATED. 768 RAM. Motherboard - ASUS M2V-MX-SE. HDD - Samsung SATA2 200 GB

After first year stable work I needed to reinstall Windows XP. As I discovered my HDD is on SATA bus I used NLite to pack Sata-drivers into XP-CD(Service pack2). After that I cant achieve stable work of my system. It crashes each second-third month after reinstalling. The main error Corrupted file in .../system32/config/system. I installed parralel OS - XP too and made reserve copy of this file. And each time I get this black screen with error I copy registry file(system) to proper folder and Win-XP revives. But its not the end. After short time it damages any file of system and show no error just black screen. This happens constantly.
What I did:
Check with antivirus DrWeb, Avira. Changed BIOS settings to disable floppy. Changed SATA bus header on motherboard. I tried to use Win7 but it had the similar problem, system crashed.
Could it be NLite fault? or
Something with hardware?
Any ideas.
 
Of course no. I guess win7 has its own sata drivers cause installation is compliting well. But it crashes as Xp too after a few months. I suspect problems with hardware. I just did memtest - no errors.
 
it sounds like you are missing some files needed by windows,Have you tried a full version of XP ? You will probably will have to go through each hardware and test each one...First thing to check would be hard drive and Ram...
 
Trouble is that I cant use original XP-Service pack-2 because they haven't SATA drivers inside. And my HDD is only SATA.
 
Windows log shows often
Type: Error
Source: Disk
Category: Unknown
Code: 7
Date: 31.07.2011
Time: 21:42:20
Computer: COMP
Описание:
Bad block on device \Device\Harddisk0\D.
Data:
0000: 03 00 68 00 01 00 b6 00 ..h...¶.
0008: 00 00 00 00 07 00 04 c0 .......À
0010: 00 01 00 00 9c 00 00 c0 ....œ..À
0018: 00 00 00 00 00 00 00 00 ........
0020: 00 d8 3e 97 01 00 00 00 .Ø>—....
0028: 1d 08 00 00 00 00 00 00 ........
0030: ff ff ff ff 01 00 00 00 ÿÿÿÿ....
0038: 40 00 00 84 02 00 00 00 @..„....
0040: 00 20 0a 12 40 03 20 40 . ..@. @
0048: 00 00 00 00 0a 00 00 00 ........
0050: 00 00 00 00 20 f9 d2 82 .... ù҂
0058: 00 00 00 00 08 30 d2 82 .....0҂
0060: 02 00 00 00 6c 9f cb 00 ....lŸË.
0068: 28 00 00 cb 9f 6c 00 00 (..˟l..
0070: 08 00 00 00 00 00 00 00 ........
0078: f0 00 03 00 00 00 00 0b ð.......
0080: 00 00 00 00 00 00 00 00 ........
0088: 00 00 00 00 00 00 00 00 ........
 
My windows log has many warnings with the same content:
Event type: Error
Event source: Disk
Event category: Absent
Event code: 7
Date: 07.08.2011
Time: 10:50:02
Computer: COMP
Description:
Uncorrect block on device \Device\Harddisk0\D.
Data:
0000: 03 00 68 00 01 00 b6 00 ..h...¶.
0008: 00 00 00 00 07 00 04 c0 .......À
0010: 00 01 00 00 9c 00 00 c0 ....œ..À
0018: 00 00 00 00 00 00 00 00 ........
0020: 00 b8 1e 8e 01 00 00 00 .¸.Ž....
0028: 83 62 00 00 00 00 00 00 ƒb......
0030: ff ff ff ff 01 00 00 00 ÿÿÿÿ....
0038: 40 00 00 84 02 00 00 00 @..„....
0040: 00 20 0a 12 40 03 20 40 . ..@. @
0048: 00 00 00 00 0a 00 00 00 ........
0050: 00 00 00 00 d8 c2 9f 82 ....ØŸ‚
0058: 00 00 00 00 90 78 ca 82 ....xʂ
0060: 02 00 00 00 5c 0f c7 00 ....\.Ç.
0068: 28 00 00 c7 0f 5c 00 00 (..Ç.\..
0070: 38 00 00 00 00 00 00 00 8.......
0078: f0 00 03 00 00 00 00 0b ð.......
0080: 00 00 00 00 00 00 00 00 ........
0088: 00 00 00 00 00 00 00 00 ........
 
It sounds like you need a new hard drive, There is a program called hard drive re generator, I have used in the pass... It works real good..
It will fix hard drive errors.. How old is your hard drive ?
 
I bought my computer in 2008 july. And it pretended to be new at that time. FreshDiagnose shows next info

SAMSUNG HD200HJ (S16KJ1KQ408203)
Hard Disk Specifications
Model ID SAMSUNG HD200HJ
Model Name SpinPoint S250
Manufacturer Samsung
Form Factor 3.5"
Interface Serial ATA II (SATA II)
Capacity 200 GB
Recording Surface 2
Rotational Speed 7200 RPM
Average Rotational Latency 4.17 ms
Average Seek 8.9 ms
Maximum Internal Data Rate 1264 Mbps
Buffer-to-Host Data Rate 300 MB/s
Buffer Size 8192 KB
Spin-Up Time 8 Sec
Dimensions 146.1 x 101.6 x 25.4 mm
Weight 462 g
Manufacturer Website http://www.samsung.com/products/harddiskdrive/index.htm

ATA Information
Controller Secondary Controller
Position Master Drive
Model Number SAMSUNG HD200HJ
Firmware Revision KF100-06
Serial Number S16KJ1KQ408203
Supported ATA Standard ATA-3, ATA-4, ATA-5, ATA-6, ATA-7

Configuration
Interface ATA
Media Type Fixed Media
CHS Geometry 16383 / 16 / 63
Current Translation CHS Geometry 16383 / 16 / 63
Current Translation Total Sectors 16,514,064 Sectors
LBA Total Sectors 268,435,455 Sectors
48-Bit LBA Total Sectors 390,721,968 Sectors
Has Multiple Logical Sectors Per Physical Sector No
Logical Sector Longer Than 512 Bytes No
Number of ECC Bytes 4
Maximum Sectors Per Interrupt 16 Sectors

Capabilities
Standby Timer Conforms ATA Standard Yes
Supports IORDY Yes
IORDY Can Be Disabled Yes
Supports LBA Mode Yes
Supports DMA Yes

Data Transfer Configuration
PIO Data Transfer Cycle Timing 2 ns
Multiple Sector Setting Is Valid Yes
Number of Sector Per Interrupt 16 Sectors
Activated Multiword DMA Modes MWDMA-0, MWDMA-1, MWDMA-2
Supported PIO Modes PIO-3, PIO-4
Minimum Multiword DMA Transfer Cycle Time 120 ns
Recommended Multiword DMA Transfer Cycle Time 120 ns
Minimum PIO Transfer Cycle Time Without Flow Control 120 ns
Minimum PIO Transfer Cycle Time With IORDY Flow Control 120 ns
Maximum Queue Depth 16
Maximum UDMA Mode UDMA-7
Selected UDMA Mode UDMA-6

Feature Set
Supports SMART Feature Yes
Supports Security Mode Yes
Supports Removable Media No
Supports Power Management Feature Yes
Supports PACKET Command Feature Set No
Supports Write Cache Yes
Supports Look-ahead Yes
Supports Release Interrupt No
Supports SERVICE Interrupt No
Supports DEVICE RESET Command No
Supports Host Protected Area Yes
Supports WRITE BUFFER Command Yes
Supports READ BUFFER Command Yes
Supports NOP Command Yes
Supports DOWNLOAD MICROCODE Command Yes
Supports READ/WRITE DMA QUEUED Command No
Supports CFA Feature Set No
Supports Advanced Power Management Feature Yes
Supports Removable Media Status Notification No
Supports Power-Up In Standby Feature No
Requires SET FEATURES Subcommand to Spinup After Power-up No
Supports SET MAX Extension Yes
Supports Automatic Acoustic Management Feature Yes
Supports 48-bit Address Yes
Supports Device Configuration Overlay Feature Set Yes
Supports FLUSH CACHE Command Yes
Supports FLUSH CACHE EXT Command Yes
Supports SMART Error Logging Yes
Supports SMART Self-test Yes
Supports Media Serial Number No
Supports Media Card Pass Through Command Feature Set No
Supports Streaming Feature Set No
Supports General Purpose Logging Feature Set Yes
Supports WRITE DMA FUA EXT and WRITE MULTIPLE FUA EXT Commands No
Supports WRITE DMA QUEUED FUA EXT Command No
Supports 64-bit World Wide Name Yes
Supports URG Bit For READ STREAM DMA EXT And READ STREAM EXT No
Supports URG Bit For WRITE STREAM DMA EXT And WRITE STREAM EXT No
Supports IDLE IMMEDIATE With UNLOAD FEATURE No

Security
Security Level High
Security Supported Yes
Security Enabled No
Security Locked No
Security Frozen Yes
Security Count Expired No
Supports Enhanched Security Erase Yes
Time Required For Security Erase Unit Completion 82 Minutes
Time Required For Enhanched Security Erase Unit Completion 82 Minutes
Master Password Revision Code 0xFFFE

Acoustic Management
Current Acoustic Management Level Intermediate Acoustic Management Level
Inter-seek Delay For ISO-7779 Acoustic Testing 0 µs

Streaming Capabilities
Minimum Stream Request Size 0 Sectors
Streaming Transfer Time DMA 0 µs
Streaming Access Latency DMA 0 µs
Streaming Transfer Time PIO 0 µs
Streaming Access Latency PIO 0 µs
 
You must log in or register to reply here.
Back
Top